VIBE BASS KIT

The VIBE 3000watt BASS KIT is specifically designed to gain maximum output from high power BASS systems. Featuring the best BASS specific cables from the VIBE CriticalLinkTM Range.

Contents of this kit:

- FLATLINESTM4AWG PWR Power and Ground cable : FLAT Heavy Duty 4 gauge power cable developed to maximised voltage transfer from battery to amplifier - highlyflexible easing installation. All cable is terminated with crimped terminal rings. 6m Power. 1m Ground
- FLATBASSTM RCA SolidCoreTM Interconnect : Specifically developed for use in BASS SYSTEMS ­ featuring oversized SolidCoreTM OFC signal wire - allowing a heavier voltage to be passed down the cable. 5 metre
- FLATBASSTM 13 SPK Bass speaker cable : Specially developed for BASS applications ­ Uses SolidCoresTM that can handle and sustain considerably more power than conventional speaker cable. 3 meters
- FLATLINES TM remote 18 : With a current rating of 14 amps this cable can easily handle TURN ON of multiple amplifiers. 5 meters
- VIBE 140 amp circuit breaker : The VIBE circuit breaker is rated at a massive 140 amps and offers critical protection to your system ­ if the system over powers or short circuits the breaker will cut in and save your equipment.
- All cable is terminated with crimped terminal rings in place and accessory fitting kit.

Compatability

This kit is compatible with the majority of amplifiers on the market ­ VIBE recommends this kit for all VIBE BASS monoblock amplifiers new, current and old models. Model: Bass system Kit ­ Bass specific amplifier wiring kit

VIBE STEREO KIT

The VIBE 1500 watt STEREO KIT is specifically designed to gain maximum output from high power full range systems. Combining the best full range cables from the VIBE CriticalLink TM range.

Contents of this kit:

- FLATLINESTM 8AWG PWR Power and Ground cable : FLAT 8 gauge power cable developed to maximised voltage transfer from battery to amplifier - highly flexible easing installation. All cable is terminated with crimped terminal rings. 6m Power. 1m Ground VIBE
- FLATSTEREOTM RCA - OFC high definition full range interconnect : Delivering the fullest signal possible from source to amplifier - the cable make up has been developed to run flat with left and right cables running parallel both with individual screening but sharing an outer FLAT jacket easing installations.
- FLATLINES TM remote 18 : With a current rating of 14 amps this cable can easily handle TURN ON of multiple amplifiers.
- FLATSTEREOTM speaker cable : OFC high definition speaker cable is produced from super fine OFC copper strands.
- AGU Fuse Holder : Water proof fuse holder should be located 12² approx from battery ­ holds glass type AGU fuses and offers reliable system protection.(Pre-wired onto Power cable) All cable is terminated with crimped terminal rings in place and accessory fitting kit

Compatability

This kit is compatible with the majority of amplifiers on the market ­ VIBE recommends this kit for all VIBE full range STEREO amplifiers new, current and old models.

Model: Stereo system Kit ­ full range stereo amplifier wiring kit

VIBE ACTIVE KIT

The VIBE 1500watt ACTIVE BASS KIT is specifically designed to gain maximum output from high power Active Bass systems (Bass Boxes). Featuring BASS specific components from the VIBE CriticalLinkTM range.


Contents of this kit:

- FLATLINESTM 8AWG PWR Power and Ground cable : FLAT 8 gauge power cable developed to maximised voltage transfer from battery to amplifier - highly flexible easing installation. All cable is terminated with crimped terminal rings. 6m Power. 1m Ground
- FLATBASSTM RCA SolidCoreTM Interconnect : specifically developed for use in BASS SYSTEMS ­ featuring oversized SolidCoreTM OFC signal wire - allowing a heavier voltage to be passed down the cable. 5metre
- AGU Fuse Holder : Water proof Fuse holder should be located 12² approx from battery ­ holds glass type AGU fuses and offers reliable system protection.
- FastPlugTM : Allows fast and safe removal of active bass enclosures via a specially made moulded robust plug ­ enclosure can be removed or replaced at any time without removing any wires.

Compatability

This kit is compatible with the majority of amplifiers on the market ­ VIBE recommends this kit for all VIBE active bass enclosures new, current and old models.

Model: Active system Kit ­ Bass specific active enclosure wiring kit SLICK 4 GAUGE WIRING KIT

The ALL NEW SLICK wiring kits match value and performance. This provides everything you need to get up and running with your new VIBE amplifier.

Contents of this kit:

- 5m 4AWG power cable
- 1m 4AWG ground cable
- 5m RCA interconnect
- 5m remote turn on wire
- 2 x 5m 16AWG speaker cable
- AGU fuseholder
- 80 amp AGU fuse
- 2 x spade terminals
- 6 pcs cable ties

SLICK 8 GAUGE WIRING KIT

The ALL NEW SLICK wiring kits match value and performance. This provides everything you need to get up and running with your new VIBE amplifier.

Contents of this kit:

- 5m 8AWG power cable
- 1m 8AWG ground cable
- 5m RCA interconnect
- 5m remote turn on wire
- 2 x 5m 16AWG speaker cable
- AGU fuseholder
- 60 amp AGU fuse
- 2 x spade terminals
- 6 pcs cable ties

There are currently no reviews. Be the first to write a review on this product click here